I have read that can be after Windows does some meltdown or spectre repair tries / updates / (or what ever)? But why the system looks stable while under stress but fails in seconds (or minutes) while waste power for nothing? But after ending the stress test and doing normal work the system crashes with BSOD within minutes.Īllways the same error: BSOD. * Running some stress tests (prime 95) for 8 hours without big problems (ok, CPU core one crashed within 2 minutes after starting the test but no other problems after). * Windows hangs (BSOD) while doing normal stuff. * Login screen runs in BSOD when not logging in within 1.2 minutes. I have installed the fall creator version (update?).
So with running BIOS in manual defined settings (as discriped) I can run my system nearly stable (only one failure per boot as maximum) to OS (Windows 10 Pro / 64 Bit). So defect RAM is not my first idea to solve the problems. So the LED is fine but only LEDs for slot 2 to 4 are blinking while initialisation. When initialitation is done this LED is on. * I've noticed the LED for the first PCI port is not blinking while initialisation. who the f**k there is no way with standard values? I think thats the way to run the board? * Have to adjust CPU voltages, LLC to go to OS more stable - I think I have done. * XMP settings (3200MHz RAM): same problems * BIOS hangs in multible boot codes in standard settings What's my problems (long story til now, right? So I think its the best methode to do updates? Have updated my BIOS chips using USB flash port and button on board. BIOS update looks fine (no error message).
Sometimes I got graphical erros in BIOS: some texts are blank, other in chinese (or asian?) language while language setting is english. In standard configuration (default settings) the board is hanging with several boot codes.:Īnd many more. Starting with BIOS 1701, tried 1801 as well as 09xx. A spin drive as well, but thats not the problem (I have disconnected for tests). memory (is in support list of the board), a Samsung 960 SSD, Intel 6850K cpu. Other parts are an AMD 6950HD graphics card (tried 7950HD with same problems), 4 * 8GB G.Skill 3200 / 15-15. Have connected the 8 pin connector and the 4 pin power connector (and yes, the 24 pin connector too). It is powered by a BeQuiet Strait Power 11 750W power supply.
I have bought an used (but nearly unused) Asus Rampage V Edition 10 board.
So please feel free to correct my english as well as my problems.
0 kommentar(er)
